MAG 5100W
Rp. 0,00
Description
The SITRANS F M MAG 5100 W with its patented liners of hard rubber NBR or ebonite and EPDM is a sensor for all water applications such as ground water, drinking water, cooling water, waste water, sewage or sludge applications.
In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:
- SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate
- SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate
- SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate
The sensor can be combined with the energy calculator type SITRANS FUE950.
Application examples: Water abstraction, Water distribution network, Waste water and as custody transfer water meter or cooling meter.
In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:
- SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate
- SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate
- SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate
The sensor can be combined with the energy calculator type SITRANS FUE950.
Application examples: Water abstraction, Water distribution network, Waste water and as custody transfer water meter or cooling meter.
Detail
Meassuring range
0 to 10 m/s
Nominal Sizes
From DN 15 to DN 2000 (1" to 78")
Accuracy
0.2 % ±2.5 mm/s
Operating Pressure
Max. 16 bar (Max. 150 psi)
Ambient temperature
From -40 to 70 °C (-40 to 158 °F)
Medium Tempreature
From -10 to 70 °C (14 to 158 °F)
Liners
EPDM
NBR hard rubber
Ebonite hard rubber
Electrodes
Hastelloy C-276
Built-in grounding electrodes
Material
Carbon steel, with corrosion resistant
two-component epoxy coating
Drinking Water Approvals
EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270,
ACS and BelgAqua
NBR: NSF/ANSI Standard 61, WRAS
Ebonite: WRAS
Custody Transfer Approvals
OILM R 49
MI-001
PTB K7.2 (Germany)
BEV OE12/C040 (Austria)
General approval
MCERTS Sira Certificate No. MC080136/00
| Meassuring range | 0 to 10 m/s |
| Nominal Sizes | From DN 15 to DN 2000 (1" to 78") |
| Accuracy | 0.2 % ±2.5 mm/s |
| Operating Pressure | Max. 16 bar (Max. 150 psi) |
| Ambient temperature | From -40 to 70 °C (-40 to 158 °F) |
| Medium Tempreature | From -10 to 70 °C (14 to 158 °F) |
| Liners |
EPDM |
| Electrodes | Hastelloy C-276 Built-in grounding electrodes |
| Material | Carbon steel, with corrosion resistant two-component epoxy coating |
| Drinking Water Approvals | EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270, ACS and BelgAqua NBR: NSF/ANSI Standard 61, WRAS Ebonite: WRAS |
| Custody Transfer Approvals | OILM R 49 MI-001 PTB K7.2 (Germany) BEV OE12/C040 (Austria) |
| General approval | MCERTS Sira Certificate No. MC080136/00 |
Benefits
- Short lead time
- Rugged NBR hard rubber liner for all water and wastewater applications
- EPDM liner specifically for drinking water applications requiring special approvals
- Ebonite liner for drinking water, water and wastewater applications
- Increased low flow accuracy for water leakage detection (NBR or EPDM liner)
- Suitable for direct burial and constant flooding (IP68)
- Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint
- Short lead time
- Rugged NBR hard rubber liner for all water and wastewater applications
- EPDM liner specifically for drinking water applications requiring special approvals
- Ebonite liner for drinking water, water and wastewater applications
- Increased low flow accuracy for water leakage detection (NBR or EPDM liner)
- Suitable for direct burial and constant flooding (IP68)
- Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint
.jpg)
